[Standard technical specifications for methacholine chloride (Methacholine) bronchial challenge test (2023)].

No SJR dataFeb 3, 2024Zhonghua jie he he hu xi za zhi = Zhonghua jiehe he huxi zazhi = Chinese journal of tuberculosis and respiratory diseases

Standard guidelines for the methacholine breathing test (2023)

AI simplified

PubMed ↗DOI ↗

Abstract

The methacholine challenge test (MCT) is crucial for evaluating airway hyperresponsiveness in asthma patients.

MCT assesses airway hyperresponsiveness, which is significant for asthma diagnosis and management.
Eleven core issues regarding MCT's clinical practice were identified, including indications and contraindications for its use.
Absolute contraindications include severe asthma history, significant lung function impairment, and recent severe health events.
Relative contraindications may involve moderate lung function impairment and certain medical conditions, requiring careful consideration before testing.
Common methods for MCT in clinical practice include quantitative nebulization and forced oscillation techniques, each with specific advantages.
Result interpretation varies based on chosen methods, with the percentage decline in lung function being a key indicator.

AI simplified

The methacholine challenge test (MCT) is a standard evaluation method of assessing airway hyperresponsiveness (AHR) and its severity, and has significant clinical value in the diagnosis and treatment of bronchial asthma. A consensus working group consisting of experts from the Pulmonary Function and Clinical Respiratory Physiology Committee of the Chinese Association of Chest Physicians, the Task Force for Pulmonary Function of the Chinese Thoracic Society, and the Pulmonary Function Group of Respiratory Branch of the Chinese Geriatric Society jointly developed this consensus. Based on the "" published in 2014, the issues encountered in its use, and recent developments, the group has updated theThrough an extensive collection of expert opinions, literature reviews, questionnaire surveys, and multiple rounds of online and offline discussions, the consensus addressed the eleven core issues in MCT's clinical practice, including indications, contraindications, preparation of provocative agents, test procedures and methods, quality control, safety management, interpretation of results, and reporting standards. The aim was to provide clinical pulmonary function practitioners in healthcare institutions with the tools to optimize the use of this technique to guide clinical diagnosis and treatment.Who is suitable for conducting MCT? What are contraindications for performing MCT?Patients with atypical symptoms and a clinical suspicion of asthma, patients diagnosed with asthma requiring assessment of the severity of airway hyperresponsiveness, individuals with allergic rhinitis who are at risk of developing asthma, patients in need of evaluating the effectiveness of asthma treatment, individuals in occupations with high safety risks due to airway hyperresponsiveness, patients with chronic diseases prone to airway hyperresponsiveness, others requiring assessment of airway reactivity.Absolute contraindications: (1) Patients who are allergic to methacholine (MCh) or other parasympathomimetic drugs, with allergic reactions including rash, itching/swelling (especially of the face, tongue, and throat), severe dizziness, and dyspnea; (2) Patients with a history of life-threatening asthma attacks or those who have required mechanical ventilation for asthma attacks in the past three months; (3) Patients with moderate to severe impairment of baseline pulmonary function [Forced Expiratory Volume in one second (FEV) less than 60% of the predicted value or FEV<1.0 L]; (4) Severe urticaria; (5) Other situations inappropriate for forced vital capacity (FVC) measurement, such as myocardial infarction or stroke in the past three months, poorly controlled hypertension, aortic aneurysm, recent eye surgery, or increased intracranial pressure.Relative contraindications: (1) Moderate or more severe impairment of baseline lung function (FEV%pred<70%), but individuals with FEV%pred>60% may still be considered for MCT with strict observation and adequate preparation; (2) Experiencing asthma acute exacerbation; (3) Poor cooperation with baseline lung function tests that do not meet quality control requirements; (4) Recent respiratory tract infection (<4 weeks); (5) Pregnant or lactating women; (6) Patients currently using cholinesterase inhibitors (for the treatment of myasthenia gravis); (7) Patients who have previously experienced airway spasm during pulmonary function tests, with a significant decrease in FEVeven without the inhalation of provocative.How to prepare and store the challenge solution for MCT?Before use, the drug must be reconstituted and then diluted into various concentrations for provocation. The dilution concentration and steps for MCh vary depending on the inhalation method and provocation protocol used. It is important to follow specific steps. Typically, a specified amount of diluent is added to the methacholine reagent bottle for reconstitution, and the mixture is shaken until the solution becomes clear. The diluent is usually physiological saline, but saline with phenol (0.4%) can also be used. Phenol can reduce the possibility of bacterial contamination, and its presence does not interfere with the provocation test. After reconstitution, other concentrations of MCh solution are prepared using the same diluent, following the dilution steps, and then stored separately in sterile containers. Preparers should carefully verify and label the concentration and preparation time of the solution and complete a preparation record form. The reconstituted and diluted MCh solution is ready for immediate use without the need for freezing. It can be stored for two weeks if refrigerated (2-8 ℃). The reconstituted solution should not be stored directly in the nebulizer reservoir to prevent crystallization from blocking the capillary opening and affecting aerosol output. The temperature of the solution can affect the production of the nebulizer and cause airway spasms in the subject upon inhaling cold droplets. Thus, refrigerated solutions should be brought to room temperature before use.What preparation is required for subjects prior to MCT?(1) Detailed medical history inquiry and exclusion of contraindications.(2) Inquiring about factors and medications that may affect airway reactivity and assessing compliance with medication washout requirements: When the goal is to evaluate the effectiveness of asthma treatment, bronchodilators other than those used for asthma treatment do not need to be discontinued. Antihistamines and cromolyn have no effect on MCT responses, and the effects of a single dose of inhaled corticosteroids and leukotriene modifiers are minimal, thus not requiring cessation before the test. For patients routinely using corticosteroids, whether to discontinue the medication depends on the objective of the test: if assisting in the diagnosis of asthma, differential diagnosis, aiding in step-down therapy for asthma, or exploring the effect of discontinuing anti-inflammatory treatment, corticosteroids should be stopped before the provocation test; if the patient is already diagnosed with asthma and the objective is to observe the level of airway reactivity under controlled medication conditions, then discontinuation is not necessary. Medications such as IgE monoclonal antibodies, IL-4Rα monoclonal antibodies, traditional Chinese medicine, and ethnic medicines may interfere with test results, and clinicians should decide whether to discontinue these based on the specific circumstances.(3) Explaining the test procedure and potential adverse reactions, and obtaining informed consent if necessary.What are the methods of the MCT? And which ones are recommended in current clinical practice?Commonly used methods for MCT in clinical practice include the quantitative nebulization method (APS method), Forced Oscillalion method (Astograph method), 2-minute tidal breathing method (Cockcroft method), hand-held quantitative nebulization method (Yan method), and 5-breath method (Chai 5-breath method). The APS method allows for precise dosing of inhaled Methacholine, ensuring accurate and reliable results. The Astograph method, which uses respiratory resistance as an assessment indicator, is easy for subjects to perform and is the simplest operation. These two methods are currently the most commonly used clinical practice in China.What are the steps involved in MCT?The MCT consists of the following four steps:(1) Baseline lung function test: After a 15-minute rest period, the subjects assumes a seated position and wear a nose clip for the measurement of pulmonary function indicators [such as FEVor respiratory resistance (Rrs)]. FEVshould be measured at least three times according to spirometer quality control standards, ensuring that the best two measurements differ by less than 150 ml and recording the highest value as the baseline. Usually, if FEV%pred is below 70%, proceeding with the challenge test is not suitable, and a bronchodilation test should be considered. However, if clinical assessment of airway reactivity is necessary and FEV%pred is between 60% and 70%, the provocation test may still be conducted under close observation, ensuring the subject's safety. If FEV%pred is below 60%, it is an absolute contraindication for MCT.(2) Inhalation of diluent and repeat lung function test for control values: the diluent, serving as a control for the inhaled MCh, usually does not significantly impact the subject's lung function. the higher one between baseline value and the post-dilution FEVis used as the reference for calculating the rate of FEVdecline. If post-inhalation FEVdecreases, there are usually three scenarios: ①If FEVdecreases by less than 10% compared to the baseline, the test can proceed, continue the test and administer the first dose of MCh. ②If the FEVdecreases by≥10% and<20%, indicating a heightened airway reactivity to the diluent, proceed with the lowest concentration (dose) of the provoking if FEV%pred has not yet reached the contraindication criteria for the MCT. if FEV%pred<60% and the risk of continuing the challenge test is considerable, it is advisable to switch to a bronchodilation test and indicate the change in the test results report. ③If FEVdecreases by≥20%, it can be directly classified as a positive challenge test, and the test should be discontinued, with bronchodilators administered to alleviate airway obstruction.(3) Inhalation of MCh and repeat lung function test to assess decline: prepare a series of MCh concentrations, starting from the lowest and gradually increasing the inhaled concentration (dose) using different methods. Perform pulmonary function tests at 30 seconds and 90 seconds after completing nebulization, with the number of measurements limited to 3-4 times. A complete Forced Vital Capacity (FVC) measurement is unnecessary during testing; only an acceptable FEVmeasurement is required. The interval between two consecutive concentrations (doses) generally should not exceed 3 minutes. If FEVdeclines by≥10% compared to the control value, reduce the increment of methacholine concentration (dose) and adjust the inhalation protocol accordingly. If FEVdeclines by≥20% or more compared to the control value or if the maximum concentration (amount) has been inhaled, the test should be stopped. After inhaling the MCh, close observation of the subject's response is necessary. If necessary, monitor blood oxygen saturation and auscultate lung breath sounds. The test should be promptly discontinued in case of noticeable clinical symptoms or signs.(4) Inhalation of bronchodilator and repeat lung function test to assess recovery: when the bronchial challenge test shows a positive response (FEVdecline≥20%) or suspiciously positive, the subject should receive inhaled rapid-acting bronchodilators, such as short-acting beta-agonists (SABA) or short-acting muscarinic antagonists (SAMA). Suppose the subject exhibits obvious symptoms of breathlessness, wheezing, or typical asthma manifestations, and wheezing is audible in the lungs, even if the positive criteria are not met. In that case, the challenge test should be immediately stopped, and rapid-acting bronchodilators should be administered. Taking salbutamol as an example, inhale 200-400 μg (100 μg per puff, 2-4 puffs, as determined by the physician based on the subject's condition). Reassess pulmonary function after 5-10 minutes. If FEVrecovers to within 10% of the baseline value, the test can be concluded. However, if there is no noticeable improvement (FEVdecline still≥10%), record the symptoms and signs and repeat the bronchodilation procedure as mentioned earlier. Alternatively, add Ipratropium bromide (SAMA) or further administer nebulized bronchodilators and corticosteroids for intensified treatment while keeping the subject under observation until FEVrecovers to within 90% of the baseline value before allowing the subject to leave.What are the quality control requirements for the APS and Astograph MCT equipment?(1) APS Method Equipment Quality Control: The APS method for MCT uses a nebulizing inhalation device that requires standardized flowmeters, compressed air power source pressure and flow, and nebulizer aerosol output. Specific quality control methods are as follows:a. Flow and volume calibration of the quantitative nebulization device: Connect the flowmeter, an empty nebulization chamber, and a nebulization filter in sequence, attaching the compressed air source to the bottom of the chamber to ensure airtight connections. Then, attach a 3 L calibration syringe to the subject's breathing interface and simulate the flow during nebulization (typically low flow:<2 L/s) to calibrate the flow and volume. If calibration results exceed the acceptable range of the device's technical standards, investigate and address potential issues such as air leaks or increased resistance due to a damp filter, then recalibrate. Cleaning the flowmeter or replacing the filter can change the resistance in the breathing circuit, requiring re-calibration of the flow.b. Testing the compressed air power source: Regularly test the device, connecting the components as mentioned above. Then, block the opening of the nebulization device with a stopper or hand, start the compressed air power source, and test its pressure and flow. If the test results do not meet the technical standards, professional maintenance of the equipment may be required.c. Verification of aerosol output of the nebulization chamber: Regularly verify all nebulization chambers used in provocation tests. Steps include adding a certain amount of saline to the chamber, weighing and recording the chamber's weight (including saline), connecting the nebulizer to the quantitative nebulization device, setting the nebulization time, starting nebulization, then weighing and recording the post-nebulization weight. Calculate the unit time aerosol output using the formula [(weight before nebulization-weight after nebulization)/nebulization time]. Finally, set the nebulization plan for the provocation test based on the aerosol output, considering the MCh concentration, single inhalation nebulization duration, number of nebulization, and cumulative dose to ensure precise dosing of the inhaled MCh.(2) Astograph method equipment quality control: Astograph method equipment for MCT consists of a respiratory resistance monitoring device and a nebulization medication device. Perform zero-point calibration, volume calibration, impedance verification, and nebulization chamber checks daily before tests to ensure the resistance measurement system and nebulization system function properly. Calibration is needed every time the equipment is turned on, and more frequently if there are significant changes in environmental conditions.a. Zero-point calibration: Perform zero-point calibration before testing each subject. Ensure the nebulization chamber is properly installed and plugged with no air leaks.b. Volume calibration: Use a 3 L calibration syringe to calibrate the flow sensor at a low flow rate (approximately 1 L/s).c. Resistance verification: Connect low impedance tubes (1.9-2.2 cmHO·L·s) and high impedance tubes (10.2-10.7 cmHO·L·s) to the device interface for verification.d. Bypass check: Start the bypass check and record the bypass value; a value>150 ml/s is normal.e. Nebulization chamber check: Check each of the 12 nebulization chambers daily, especially those containing bronchodilators, to ensure normal spraying. The software can control each nebulization chamber to produce spray automatically for a preset duration (e.g., 2 seconds). Observe the formation of water droplets on the chamber walls, indicating normal spraying. If no nebulization occurs, check for incorrect connections or blockages.How to set up and select the APS method in MCT?The software program of the aerosol provocation system in the quantitative nebulization method can independently set the nebulizer output, concentration of the methacholine agent, administration time, and number of administrations and combine these parameters to create the challenge test process. In principle, the concentration of the methacholine agent should increase from low to high, and the dose should increase from small to large. According to the standard, a 2-fold or 4-fold incremental challenge process is generally used. In clinical practice, the dose can be simplified for subjects with good baseline lung function and no history of wheezing, such as using a recommended 2-concentration, 5-step method (25 and 50 g/L) and (6.25 and 25 g/L). Suppose FEVdecreases by more than 10% compared to the baseline during the test to ensure subject safety. In that case, the incremental dose of the methacholine agent can be reduced, and the inhalation program can be adjusted appropriately. If the subject's baseline lung function declines or has recent daytime or nighttime symptoms such as wheezing or chest tightness, a low concentration, low dose incremental process should be selected.What are the precautions for the operation process of the Astograph method in MCT?(1) Test equipment: The Astograph method utilizes the forced oscillation technique, applying a sinusoidal oscillating pressure at the mouthpiece during calm breathing. Subjects inhale nebulized MCh of increasing concentrations while continuous monitoring of respiratory resistance (Rrs) plots the changes, assessing airway reactivity and sensitivity. The nebulization system employs jet nebulization technology, comprising a compressed air pump and 12 nebulization cups. The first cup contains saline, cups 2 to 11 contain increasing concentrations of MCh, and the 12th cup contains a bronchodilator solution.(2) Provocation process: Prepare 10 solutions of MCh provocant with gradually increasing concentrations.(3) Operational procedure: The oscillation frequency is usually set to 3 Hz (7 Hz for children) during the test. The subject breathes calmly, inhales saline solution nebulized first, and records the baseline resistance value (if the subject's baseline resistance value is higher than 10 cmHO·L·s, the challenge test should not be performed). Then, the subject gradually inhales increasing concentrations of methacholine solution. Each concentration solution is inhaled for 1 minute, and the nebulization system automatically switches to the next concentration for inhalation according to the set time. Each nebulizer cup contains 2-3 ml of solution, the output is 0.15 ml/min, and each concentration is inhaled for 1 minute. The dose-response curve is recorded automatically. Subjects should breathe tidally during the test, avoiding deep breaths and swallowing. Continue until Rrs significantly rises to more than double the baseline value, or if the subject experiences notable respiratory symptoms or other discomfort, such as wheezing in both lungs upon auscultation. At this point, the inhalation of the provocant should be stopped and the subject switchs to inhaling a bronchodilator until Rrs returns to pre-provocation levels. If there is no significant increase in Rrs, stop the test after inhaling the highest concentration of MCh.How to interpret the results of the MCT?The method chosen for the MCT determines the specific indicators used for interpretation. The most commonly used indicator is FEV, although other parameters such as Peak Expiratory Flow (PEF) and Rrs can also be used to assess airway hyperresponsiveness.The test results can be classified as positive, suspiciously positive, or negative, based on a combination of the judgment indicators and changes in the subject's symptoms. If FEVdecreases by≥20% compared to the baseline value after not completely inhaling at the highest concentration, the result can be judged as positive for Methacholine bronchial challenge test. If the patient has obvious wheezing symptoms or wheezing is heard in both lungs, but the challenge test does not meet the positive criteria (the highest dose/concentration has been inhaled), and FEVdecreases between 10% and 20% compared to the baseline level, the result can also be judged as positive. If FEVdecreases between 15% and 20% compared to the baseline value without dyspnea or wheezing attacks, the result can be judged as suspiciously positive. Astograph method: If Rrs rises to 2 times or more of the baseline resistance before reaching the highest inhalation concentration, or if the subject's lungs have wheezing and severe coughing, the challenge test can be judged as positive. Regardless of the result of the Methacholine bronchial challenge test, factors that affect airway reactivity, such as drugs, seasons, climate, diurnal variations, and respiratory tract infections, should be excluded.When using the APS method, the severity of airway hyperresponsiveness can be graded based on PD-FEVor PC-FEV. Existing evidence suggests that PDshows good consistency when different nebulizers, inhalation times, and starting concentrations of MCh are used for bronchial provocation tests, whereas there is more variability with PC. Therefore, PDis often recommended as the quantitative assessment indicator. The threshold value for PDwith the APS method is 2.5 mg.The Astograph method often uses the minimum cumulative dose (Dmin value, in Units) to reflect airway sensitivity. Dmin is the minimum cumulative dose of MCh required to produce a linear increase in Rrs. A dose of 1 g/L of the drug concentration inhaled for 1-minute equals 1 unit. It's important to note that with the continuous increase in inhaled provocant concentration, the concept of cumulative dose in the Astograph method should not be directly compared to other methods. Most asthma patients have a Dmin<10 Units, according to Japanese guidelines. The Astograph method, having been used in China for over twenty years, suggests a high likelihood of asthma when Dmin≤6 Units, with a smaller Dmin value indicating a higher probability. When Dmin is between 6 and 10 Units, further differential diagnosis is advised to ascertain whether the condition is asthma.A negative methacholine challenge test (MCT) does not entirely rule out asthma. The test may yield negative results due to the following reasons:(1) Prior use of medications that reduce airway responsiveness, such as β2 agonists, anticholinergic drugs, antihistamines, leukotriene receptor antagonists, theophylline, corticosteroids, etc., and insufficient washout time.(2) Failure to meet quality control standards in terms of pressure, flow rate, particle size, and nebulization volume of the aerosol delivery device.(3) Poor subject cooperation leads to inadequate inhalation of the methacholine agent.(4) Some exercise-induced asthma patients may not be sensitive to direct bronchial challenge tests like the Methacholine challenge and require indirect bronchial challenge tests such as hyperventilation, cold air, or exercise challenge to induce a positive response.(5) A few cases of occupational asthma may only react to specific antigens or sensitizing agents, requiring specific allergen exposure to elicit a positive response.A positive MCT does not necessarily indicate asthma. Other conditions can also present with airway hyperresponsiveness and yield positive results in the challenge test, such as allergic rhinitis, chronic bronchitis, viral upper respiratory infections, allergic alveolitis, tropical eosinophilia, cystic fibrosis, sarcoidosis, bronchiectasis, acute respiratory distress syndrome, post-cardiopulmonary transplant, congestive heart failure, and more. Furthermore, factors like smoking, air pollution, or exercise before the test may also result in a positive bronchial challenge test.What are the standardized requirements for the MCT report?The report should include: (1) basic information about the subject; (2) examination data and graphics: present baseline data, measurement data after the last two challenge doses or concentrations in tabular form, and the percentage of actual measured values compared to the baseline; flow-volume curve and volume-time curve before and after challenge test; dose-response curve: showing the threshold for positive challenge; (3) opinions and conclusions of the report: including the operator's opinions, quality rating of the examination, and review opinions of the reviewing physician.What are the adverse reactions and safety measures of MCT?During the MCT, the subject needs to repeatedly breathe forcefully and inhale bronchial challenge agents, which may induce or exacerbate bronchospasm and contraction and may even cause life-threatening situations. Medical staff should be fully aware of the indications, contraindications, medication use procedures, and emergency response plans for the MCT. Guidelines for Pulmonary Function-Bronchial Provocation Test Standard technical specifications of methacholine chloride (methacholine) bronchial challenge test (2023). Summary of recommendations Question 1: Question 2: Question 3: Question 4: Question 5: Question 6: Question 7: Question 8: Question 9: Qualitative judgment: Quantitative judgment: Precautions: Question 10: Question 11: 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 1 1 1 1 20 1 20 1 20 20 20 20 -1 -1 -1 -1 -1 -1

Abstract

Related papers