Comparison of continuous temperature measurement methods in the intensive care unit: standard bladder catheter measurements versus non-invasive transcutaneous sensors

Jul 27, 2024Journal of clinical monitoring and computing

Comparing continuous body temperature measurement using bladder catheters and non-invasive skin sensors in intensive care

AI simplified

Abstract

A wearable temperature measurement system showed a (MAE) of 0.45 °C for lateral chest measurements compared to bladder temperatures.

  • The wearable system consistently exhibited a negative bias relative to bladder temperature measurements.
  • Body constitution influenced the accuracy of the wearable temperature sensor, with higher MAE observed in patients with a body mass index (BMI) ≥ 25.
  • The mean absolute error for the tympanic measurements was 0.35 °C, which was lower than the errors for the wearable system.
  • In at least one subset of patients, the non-invasive device's precision was comparable to that of tympanic measurements.
  • The wearable system did not meet clinically relevant acceptance criteria for accurately identifying fever compared to invasive methods.

AI simplified

Key numbers

0.45 °C
(Lateral Chest)
Compared to bladder temperature measurements.
36.5%
Sensitivity for Fever Detection (Lateral Chest)
Threshold set at ≥ 38 °C.
15.2%
False Negative Rate (Clavicular Position)
In patients with fever based on bladder temperature.

Full Text

What this is

  • This study compares non-invasive continuous temperature measurement methods with standard invasive bladder catheter measurements in ICU patients.
  • 112 patients were monitored using a novel wireless sensor and traditional tympanic and bladder probes.
  • The focus was on accuracy, bias, and the ability to detect fever episodes.

Essence

  • The non-invasive temperature sensors showed a consistent negative bias compared to bladder measurements, with mean absolute errors of 0.45 °C for the lateral chest and 0.50 °C for the clavicular position. These sensors did not meet clinical accuracy standards for fever detection.

Key takeaways

  • The () for lateral chest and clavicular positions was 0.45 °C and 0.50 °C, respectively, indicating underestimation of body temperature. This underestimation was more pronounced in patients with a BMI ≥ 25, where the increased to 0.50 °C for the lateral chest.
  • Sensitivity for detecting febrile conditions (≥ 38 °C) was low, with only 36.5% for the lateral chest sensor and 16.2% for the clavicular sensor. This suggests that these non-invasive methods may not reliably identify fever compared to invasive methods.
  • The study found that 9.9% of lateral chest measurements and 15.2% of clavicular measurements resulted in false negatives for fever detection, potentially leading to missed clinical decisions.

Caveats

  • The accuracy of non-invasive sensors was influenced by body composition, particularly in overweight patients, which may limit their reliability in diverse populations.
  • The study's findings may not generalize to all ICU settings, as the performance of the sensors can vary based on patient characteristics and clinical contexts.
  • The non-invasive sensors had a slower response to temperature changes compared to invasive methods, which could affect their effectiveness in dynamic critical care situations.

Definitions

  • Mean Absolute Error (MAE): The average absolute difference between measured temperatures and a reference standard, indicating measurement accuracy.

AI simplified

what lands in your inbox each week:

  • 📚7 fresh studies
  • 📝plain-language summaries
  • direct links to original studies
  • 🏅top journal indicators
  • 📅weekly delivery
  • 🧘‍♂️always free